Class A Electronic Circulation Pump EvoSanitary®

The circulation pump is used for conveying liquids in installations. Main applications: conveying water in heating installations; conveying water in closed industrial installations, recirculation. The pump is equipped both with 2 union connectors and with a power cable and plug Advantages Reduces energy consumption by up to 80% compared to traditional pumps 11 operating modes, including night mode and automatic mode, as well as: Proportional pressure mode • If the proportional pressure mode is selected, the differential pressure varies proportionally with the flow rate; for example, a higher flow means a higher proportional pressure • Proportional pressure is the preferred option for a single‑pipe system with large flow variations • Proportional pressure curve (high and low) Constant speed mode • Three constant speed modes regardless of flow Constant pressure mode • The pump maintains constant pressure regardless of flow Easy operation • One‑button, intuitive operation makes control mode selection simple Low‑noise operation Suitable for installation also in existing systems Electric motor 230V/50Hz , 20-87W , with cast‑iron body Maximum flow: 44-65 L/min ; Maximum head:  4-8m Inlet/outlet connection: 1" -model 25 ; 1 1/4"- Model 32 ! For your safety, read this manual and the general safety instructions carefully before using the equipment. Failure to observe these rules may result in electric shock, fire and/or personal injury. The product complies with current European safety standards! Always check that the supply voltage matches the value indicated on the equipment nameplate.  Do not twist the equipment’s power cord  Do not carry the equipment by the power cord and do not pull the power cord to unplug it from the socket.  Keep the equipment power cord away from heat sources, oil stains, grease, sharp objects and sources that emit heat.  Check the plug and the power cord regularly and, if they are damaged, contact a licensed electrician.  Do not overload the pump! It can be used safely if the specified operating parameters are observed. Do not use power tools for purposes other than those intended. Service  Repairs must be carried out only by authorized personnel, replacing accessories and spare parts with original ones to avoid accidents due to improper repairs. Avoid using the pump when the ambient temperature is higher than 35°C or lower than 0°C, or operating with water at a temperature higher than 95°C.  DANGER OF FREEZING! If the pump remains inactive at temperatures below 0ºC, make sure there is no residual water that could freeze and thus damage the pump components.  When the pump is used to transfer water from a solar panel, impurities are also drawn in along with the water; therefore, installing a filter is recommended.  The pump must be installed by qualified personnel. Keep out of reach of children!